Build. Tinker. Ride. Trials and Tribulations (and good times) of my motorcycle projects and other garage tinkering. Learning and building things. Building, wrenching on, and riding Harley Davidson Evolution Sportsters, Big Twins, and anything else with two wheels. Currently working on restoring and preserving a 1988 Harley Davidson Sportster chopper. I also post information on other DIY projects I tinker on.
She started!!! I replaced the ignition system with a new module, sensor, rotor, and coil. Prior to replacing the ignition system I was getting a spark on both plugs but based on some youtube research; we had a spark, just not enough….
Looks like the reason we are not able to get the Sporty to start is the ignition module. So replacing it with a Compu-Fire HDE-1 Digital Electronic Ignition which I ordered and is on the way. Since I am waiting on parts…
Still having issues getting the Sporty to start. She turns over, sounds like she wants to go… but nope. Have tried a fresh battery and some starter fluid with no luck. Couple of buddies on Facebook said I may not have good…
Sandy and I did some work on the Sporty over the weekend. Primary is all put together. Carburetor and such is mounted. When we hit the button she turns over, even fires a few times, but will not start. Couple of times…
Just a quick checklist of things I need to finish up to try and get the Sporty started, maybe this weekend.
Did some tinkering on the bike this evening after work. When I tore things down and I pulled the exhaust off two of the four studs, one in the front and one in the rear, came out with the nut so I…
Just a bit of tinker on the Sporty this weekend. Nothing major done, but checked a couple of small things off the list. Every little thing gets me that much closer to making it go (and be bad ass while going).
Had the day off today and the new oil tank showed up. After a trip to the dealership to pick up the isolation mounts I got it fitted. Not completely done yet, I have a couple other things to do first, but…
Took a wire brush to a couple of rust spots where the seat hits the frame. Cleaned them up real good, hit them with some etching primer and then some black engine paint.
The wiring on the bike was a mess. Along the way someone installed a bunch of extra junk (turn signal canceller, brake flasher, etc) and moved a bunch of stuff around. Previous owner said it had fatbob tanks with a dash on…